居民电子废物回收行为影响因素的实证研究

基于对350名城市居民的问卷调查结果,运用验证性因子分析方法对居民的电子废物回收行为、行为意向及其影响因素进行了实证研究.结果表明,基于计划行为理论所建立的结构方程模型可以较为有效地诠释有关研究假设,环境知识、舆论宣传和垃圾分类等情境因素对电子废物回收行为具有调节作用.知觉行为控制对于行为意向转化为行为具有非常重要地促进作用,而便利状况则是影响知觉行为控制的重要因素.     

Thermal cracking of waste printed wiring boards for mechanical recycling by using residual steam preprocessing

Mechanical waste-processing methods, which combine crushing and separation processes for the recovery of valuable materials, have been widely applied in waste printed wiring board (PWB) treatment. However, both the high impact toughness and the tensile and flexural strengths of whole PWB with a laminated structure result in great energy consumption and severe abrasion of the cutters during multi-level crushing. In addition, the high temperatures occurring in continual crushing probably cause the decomposition of the polymer matrix. A thermal-crack method using residual steam as the heating medium has been developed to pre-treat waste PWBs. This treatment reduces the mechanical strength in order to improve the recovery rate of valuable materials in subsequent mechanical recycling. The changes of the PWBs’ macro-mechanical properties were studied to evaluate thermal expansion impacts associated with changes in temperature, and the dynamic dislocation micro-structures were observed to identify the fracture mechanism. The results showed that thermal cracking with steam at the temperature of 500 K can effectively attenuate the mechanical properties of waste PWBs, by reducing the impact, tensile and flexural strengths respectively, by 59.2%, 49.3% and 51.4%, compared to untreated PWB. Thermal expansion can also facilitate the separation of copper from glass fiber by reducing peel resistance by 95.4% at 500 K. It was revealed that the flexural fracture was a transverse cracking caused by concentrated stress when the heating temperature was less than 500 K, and shifted to a vertical cracking after exceeding 500 K.     

Co-fermentation of waste activated sludge with food waste for short-chain fatty acids production: effect of pH at ambient temperature

Effect of pH ranging from 4.0 to 11.0 on co-fermentation of waste activated sludge (WAS) with food waste for short-chain fatty acids (SCFAs) production at ambient temperature was investigated in this study. Experimental results showed that the addition of food waste significantly improved the performance of WAS fermentation system, which resulted in the increases of SCFAs production and substrate reduction. The SCFAs production at pH 6.0, 7.0, 8.0, and 9.0 and fermentation time of 4 d was respectively 5022.7, 6540.5, 8236.6, and 7911.7 mg COD·L^-1, whereas in the blank tests (no pH adjustment, pH 8.0 (blank test 1), no food waste addition, pH 8.0 (blank test 2), and no WAS addition (blank test 3)) it was only 1006.9, 971.1, and 1468.5 mg COD·L^-1, respectively. The composition of SCFAs at pH from 6.0 to 9.0 was also different from other conditions and propionic acid was the most prevalent SCFA, which was followed by acetic and n-butyric acids, while acetic acid was the top product under other conditions. At pH 8.0 a higher volatile suspended solids (VSS) reduction of 16.6% for the mixture of WAS and food waste than the sole WAS indicated a synergistic effect existing in fermentation system with WAS and food waste. The influence of pH on the variations of nutrient content was also studied during anaerobic fermentation of the mixture of WAS and food waste at different pH conditions. The release of NH4+-N increased with fermentation time at all pH values investigated except 4.0, 5.0 and in blank test one. The concentrations of soluble phosphorus at acidic pHs and in the blank test one were higher than those obtained at alkaline pHs. Ammonia and phosphorus need to be removed before the SCFAs-enriched fermentation liquid from WAS and food waste was used as the carbon source.     

上海市生活垃圾处置计划量指标测算模型初探

对生活垃圾处置计划管理政策的意义、生活垃圾处置计划指标测算模型建立的意义和作用进行分析,对建立模型的因素、计算公式、计算流程等进行详细说明,并对3个典型区县的实际情况进行了计算和分析,总结了模型存在的问题和完善方向。     

Hazardous waste management in educational and research centers: a case study

The hazardous waste management (HWM) practice at Tehran University of Medical Sciences Central Campus, Iran, was investigated in this study. Four schools were selected and the required information such as type and amount of wastes, temporary storage methods, waste discharge frequency, and final waste disposal methods using sampling, questionnaires, interviews with laboratory staff, and reference to available documents were gathered. The quantity of hazardous waste generation per year excluding the uncontrolled wastewater was found to be 2.072 tons per year. The obtained results show that wastes having features of being infectious, toxic, ignitable, carcinogenic, corrosive, and reactive were present at 32%, 28%, 16%, 14%, 8%, and 2%, respectively. In the central campus, hazardous solid wastes managed with household solid wastes and hazardous liquid waste were discharged into the sinks without any kind of control; improper HWM practices are evident from the point of waste production to final disposal.     

印染污泥焚烧烟气污染控制案例分析

以广东省某两家印染厂的印染污泥焚烧项目为主要研究对象,从污泥处理技术路线、焚烧设备及烟气处理流程等各方面入手,对各厂印染污泥与煤混烧烟气中颗粒物、NOx、SO2、酸性气体(HF、HCl)和重金属等污染物的进行采样分析,并对各厂现有烟气污染物控制设施的运行效果进行调研,结果表明,布袋除尘的效果较为理想,除尘效率可达99%以上;使用印染废水作为吸收液的湿法脱硫技术对SO2及酸性气体的去除效果不理想;SNCR对NOx具有一定的去除效果,是一种较为经济、高效的脱硝技术;焚烧后,大部分重金属最终以飞灰的形式被除尘器去除,但仍有部分重金属如Hg在出口烟气中的浓度仍然很高,需要采取必要的措施控制烟气中的重金属. 此外,基于印染污泥焚烧实例分析,提出适于印染污泥与煤混烧烟气处理工艺流程.     

Metal removal with two biochars made from municipal organic waste: adsorptive characterization and surface complexation modeling

The adsorptive characteristics of biochar produced from garden green waste (S-char) and a mixture of food waste and garden green waste (FS-char) were investigated. Adsorption of Cu²⁺, Zn²⁺, and Mn²⁺ onto the two biochars reached equilibrium within 48 hours. The metal adsorption was effectively described by the pseudo-second-order kinetic and Freundlich isotherm models which suggest heterogeneous chemisorption. The initial solution pH influenced adsorption of Zn²⁺ and Mn²⁺ but not of Cu²⁺. Simulation via a surface complexation model showed that the fraction of XOCu⁺ adsorbed onto biochar was increased with increasing pH until it reached the adsorption maximum at pH 8.5, while the endpoint for the maximum of XOMn⁺ was higher than pH 12.     

Directions for hazardous waste storage and final disposal of treated hazardous waste (THW) in Austria

Austria produces about 700,000 tons of hazardous waste a year. Approximately 8% are sent to the incinerating facility EBS near Vienna. Approximately 60% THW (treated hazardous wastes) are finally disposed of. An unknown amount is sent to foreign countries for storage and landfilling.

By order of the Ministry of Agriculture and the Ministry of Public Health our institute elaborates guidelines for designing and operating final disposal hazardous waste facilities.

This paper deals with the fundamental aspects and the present state of these guidelines.     

MESIP∗: Modelling environmental scenarios in ponds

MESIP is a fugacity model which can predict the fate of organic hydrophobic chemicals in aquatic ecosystems. In this paper a short introduction to the mathematical model is presented together with a more detailed listing of the required input data. Comparison of the calculated and measured fate of a fluorescent whitening compound in an artificial outdoor pond is shown     

Industrial ecology flows of agriculture and food industry in Finland: utilizing by-products and wastes

Although half of the administrative units in China are said to have implemented their local Agenda 21, the promotion of sustainable communities is not pervasive. In this paper, we adopted a relatively untried mode of analysis and a socio-economic context to illustrate the potentials and failures of China's grassroots local government bodies in achieving sustainable waste management. Our study shows that, among the three main functions of sustainable waste management (ensuring environmental hygiene, provision of recycling logistics and changing the consumption pattern of the local community) for local governments, grassroots local government bodies in mainland China are only able to do the minimum, i.e. ensuring environmental hygiene and handling complaints. One of the reasons for the failure is that, despite the emphasis on capacity building in China's Agenda 21, the reality is that no action is taken to empower grassroots local government. Despite the high profile accorded by the Chinese central government to motivating local governments to formulate their own Agenda 21, local sustainability and waste management performance have little relevance to the appraisal systems of these government agents.